RESINSFumed Silica in Resin Applications
Reinforcement The high surface area of fumed silica provides a large number of bonding sites between the silica particles and the polymer matrix, which can enhance the load transfer and stress distribution within the resin system.
By integrating fumed silica, the mechanical strength of resins increases, allowing for enhanced tensile strength, impact resistance, and durability. Study shows that the incorporation of 3 wt.% fumed silica into epoxy resins can increase tensile strength by approximately 20%.
Thickening and Thixotropy Fumed silica can act as a thickening agent in resin formulations by increasing their viscosity and imparting a thixotropic behavior. Thixotropy, the property of fluids to become less viscous under stress, is crucial for flow control, anti-sagging, and anti-settling. This can improve the ease of handling and application of the resin, as well as prevent sagging or dripping during curing.
Thermal Stability The incorporation of fumed silica into resin systems can also contribute to improved thermal stability. Fumed silica restrains the movement of cured molecular chain, and improves the heating temperature threshold of resins. This is particularly important in applications where the final product is exposed to high temperatures. Adding 5 wt.% fumed silica to epoxy resins can increase the glass transition temperature (Tg) by 10-15°C, thereby enhancing the resin’s thermal stability.
Anti-settling and Anti-sagging Fumed silica can prevent the settling and sagging of pigments, fillers, or other solid additives in resin systems, By incorporating fumed silica, resins exhibit better resistance to settling during storage and reduced sagging when applied to vertical surfaces.
Anti-Aging Fumed silica can help reflect Ultraviolet/ UV, prevent resins from degradation. By improving the resin’s mechanical and thermal stability, fumed silica can slow down the aging process and extend the material’s lifespan. For example, the addition of 5 wt.% fumed silica to polyurethane resins can increase the resistance to ultraviolet (UV) degradation by up to 30%.
Transparency Fumed silica can help maintain transparency in clear resin systems due to its ultra-fine particle size and amorphous structure. The refractive index of fumed silica (1.46) is close to that of many resin systems, minimizing the scattering of light and preserving transparency.
These characteristics make fumed silica an indispensable additive in various resin systems, such as epoxy, polyester, polyurethane, and acrylic resins.
PrevSilicone Rubber
NextPrinting Inks
SubmitFull Name * Company Name Email * Phone * Message Submit |